> For the complete documentation index, see [llms.txt](https://help.auxalia.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.auxalia.com/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-equipment.md).

# Non-Spec Driven - Equipment

This chapter describes the setup in the Wizard if you want to link your P\&ID and 3D Equipment. Linking Equipment is optional.

If you want to link Nozzles too, you must setup the Wizard for Equipment first.

You can have only two Non-Spec Driven configuration in your project. One for Equipment and optional one for the Nozzles. Nozzles are described under [Non-Spec Driven - Nozzle](/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-nozzle.md).

Table of Content:

* [Page 1 - Link Type](/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-nozzle/page-1-link-type.md)
* [Page 2 - Class Selection P\&ID](/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-nozzle/page-2-class-selection-pid.md)
* [Page 3 - Class Selection 3D](/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-nozzle/page-3-class-selection-3d.md)
* [Page 4 - P\&ID <--> 3D Mapping](/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-nozzle/page-4-pid-3d-mapping.md)
* [Page 5 - Link Configuration Name](/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-nozzle/page-5-link-configuration-name.md)
* [Check](/plant-tools/plantspecdriven/how-to-use/configuration/the-wizard/non-spec-driven-nozzle/check.md)